Motionblinds 433MHz Motor CM-04
FAQ CM-04 433MHZ
Power supply is not connected or the rechargeable battery is empty.
Connect the power supply to the motor or charge the rechargeable battery tube.
Remote battery is empty. (LEDS of remote are flashing rapidly.)
Replace the battery in the remote. See the manual of the remote.
Remote battery is inserted incorrectly.
Replace the battery in the remote. See the manual of the remote.
Radio-frequency interference.
Make sure that the antenna of the motor is out of the way of metal objects.
The distance from the remote to the motor is too far.
Move closer to the motor.
The remote is not connected to the blind.
Pair the remote with the motor. See step 6.
Multiple blinds are paired with a single channel.
Pair the blind with a free channel to program or use single select to program the blind.
No end limits are programmed.
Program end limits . See step 8-11.
End limits are programmed incorrectly.
Reprogram end limits. See step 8-11.
The rotational direction has been set incorrectly.
Change the rotational direction. See step 7.
The blind is in program mode.
Press the program button on the motor to exit program mode.