Motionblinds 433MHz Motor CM-03
FAQ CM-03 433MHZ
Motor is in transport mode.
Activate the motor. See step 25.
Motor battery is empty.
Charge the motor. See step 19.
Remote battery is empty. (LEDS of remote are flashing rapidly.)
Replace the battery in the remote. See the manual of the remote.
Remote battery is inserted incorrectly.
Replace the battery in the remote. See the manual of the remote.
Radio-frequency interference.
Make sure that the antenna of the motor is out of the way of metal objects.
The distance from the remote to the motor is too far.
Move closer to the motor.
The remote is not connected to the blind.
Pair the remote with the motor. See step 6.
The battery of the motor is empty.
Charge the motor. See step 19.
Charger is not plugged in or does not work.
Try a different charger or make sure the charger is plugged in the outlet.
Multiple blinds are paired with a single channel.
Pair the blind with a free channel to program or use single select to program the blind.
No end limits are programmed.
Program end limits. See step 8-11.
End limits are programmed incorrectly.
Reprogram end limits. See step 8-11.
The direction of rotation has been set incorrect.
Change the rotational direction. See step 7.
The blind is in program mode.
Pess the program button on the motor to exit program mode.